Tornado Otter Fence RL19/180/5 C14 combined with RL6/50/5 C5 is designed as a two piece otter fence for installation in areas of restricted accessibility. This enables the RL6/50/5 (ground skirt) to be installed before the intermediate posts and RL19/180/5 (top net) are installed. The two nets are connected with netting clips. Zinc and zinc aluminium coated agricultural fence service life can be affected significantly when exposed to extremely acidic or saline environments and this factor should be considered when designing your fence installation.
For typical service life to be achieved it is recommended that the product must be installed in an atmosphere with corrosively class C1, C2 or C3 (very low/low/medium) in accordance with ISO 9223 and must not come into contact with substances that will accelerate corrosion, including but not limited to fertilisers, pesticides, herbicides, salt water and soils of pH lower than 5.5. Particularly at sites with peaty and wet ground conditions, it is recommended that you have the soil pH tested prior to designing your installation. The nets have pre-stripped ends for ease of joining. It features solid vertical wires and the unobtrusive high pressure bonded Torus knot which does not have any sharp edges.
Tornado Otter Fence Ground Skirt Specification and Installation Guide
